Motherboards

APC USB TO SERIAL SMART SIGNALING CABLE DRIVER DOWNLOAD

To do that, you need to disconnect everything including serial cable , and then turn off and disconnect any load. Cable type is shielded 28AWG. I have read that serial to serial should work. Should i source a laptop with serial port and connect a standard DB9 cable to the cable and re-test? And instead of using a PC with a serial port, I would advise simply getting one of the PLbased USB-to-serial adapter cables – they work well for managing serial console stuff with nearly every OS released within the last 10 years.

Uploader: Maurisar
Date Added: 21 March 2013
File Size: 13.71 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 98783
Price: Free* [*Free Regsitration Required]

Ever since, any attempt trying to make contact with the NIC fails. Sign up using Email and Password. This is the C model: Long story short, I was able to configure network adapter using telnet.

Home Questions Tags Users Unanswered. The documented pinout looks like a simple null-modem cable swapping the TX and RX pins: Post Your Answer Discard By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies.

I don’t have any way of telling if the card is just wnt bad, or if I really have to attempt the serial as these instructions. APC by Schneider Electric shall have no responsibility for the accuracy, correctness or objectionable nature of any user-submitted content, and disclaims any and all liability arising from or related to your use of the website.

  AZTECH DSL206U MODEM DRIVER DOWNLOAD

Well, to uzb, 9. Post as a guest Name.

I did manual arp entry to reach out to as per these instructions. The cabke pinout looks like a simple null-modem cable swapping the TX and RX pins:.

Interface Cables

I then installed PCBE agent 9. Let me know what happens there. Michael Kohne 1, 1 13 Hi – Just managed to test the T following the ‘braindead’ procedure but no joy! Should i source a laptop with serial port and connect a standard DB9 cable to the cable and re-test? NickW 9, 1 12 This website may contain content submitted by users and is for informational purposes only.

It might be helpful to also braindead the UPS and try again with the laptop. To do that, you need srrial disconnect everything including serial cableand then turn off and disconnect any load. Choose a location discussion: However, I have here in hand samrt Cisco YC Cable that looks like it could work, but I am having hard time trying to find the wire configuration to see if they would match up. Make sure it is this one because a ti cable could turn the UPS off since there is a special pinout on this cable.

Hit the reset button, and the reattempted the previous step. As to finding a serial port, put out a couple of dollars for a serial-USB adapter and plug it into a nearby server or your laptop to gain control.

  JVC GR-D53EK DRIVER

nic – Is APC’s smart-signaling cable () really proprietary? – Server Fault

I have read that USB to serial may not work with some models although the cable shipped with the alc There are no forums in this space.

I signalinv read that serial to serial should work. It should’ve been included in your lit kit with the UPS. The only thing that seperates me from the UPS unit is 48p switch, so there shouldn’t be any network filtering within the same subnet.

For whatever reason, when we reboot our machine that seriak had configured for auto-shutdown with our UPS unit, the NIC on the UPS seemingly just dropped it’s IP configuration still trying to figure that one out.

StruxureWare for Data Centers. Do you see the device listed in device manager assuming this is Windows? We need to get the USB to serial adapter installed first and make sure its recognized before we go further.