In the picture above the address bar has It usually does not matter which browser you choose to use. Ethernet network or single computer. This may be done for security or to improve network efficiency. These include the more advanced features used for network management and security as well as administrative tools to manage the Router, view statistics and other information used to examine performance and for troubleshooting. Select the new PVC to configure from the pull-down menu.

Uploader: Kebei
Date Added: 20 April 2005
File Size: 61.14 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 38938
Price: Free* [*Free Regsitration Required]

Select the d-ink level being changed, click the Modify admin password option to change Admistrator level password or Modify user password option to change the user level password.

Choose the Connection Type from the pull-down menu located under the User Name and Password entry fields. Click the User radio button.

If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Port StartPort Map box and the highest number of that range into wirelss Port End box. We also have the Internets largest collection of Router Screenshots. Click the Add button. There are two general types of protection Wreless, Port Scan that can be enabled on the Router, as well as filtering for specific packet types sometimes used by hackers. You may set the Beacon Interval range between microseconds per beacon sent.


When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. Line – This port connects to the wall jack.

Connect the power adapter here to power on the Router. Since this wlreless blocks incoming connections you may need open a port through it for certain games and applications.


Ds,-2640t name is only used as a reminder and has no effect on the port forward. Position your devices so that the number of walls or ceilings is minimized. Create a name for this forward and put it in the Rule Name box. Note Use the Firmware Upgrade window to load the latest firmware for the device. This configuration works with all ADSL implementations.

This ensures that your ports will remain open even after your device reboots. Before You Start Ethernet network or single computer.

D-Link DSLT – wireless router – DSL modem – b/g – desktop Overview – CNET

Select None to configure WEP later. If all goes well rrouter will see the following screen:. Use the navigation buttons to view or scroll log pages. You may also configure WEP security settings at this time or configure them later using the web manager. To save the system configuration settings, click the Tools tab. You will be presented first with the Administrator Settings window.


D-Link DSL-2640T – wireless router – DSL modem – 802.11b/g – desktop

The two basic styles ds-2640t low pass filters commonly used are described below. Selecting ToS will display the following window. The device will restart with default settings. Setup a static IP address on either your computer or device that you want to forward a port to.

How to Open Ports in a D-Link DSL-2640T Router

Make sure you have all the necessary information before you configure the WAN connection. Page 7 It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future.

Navigate to the port forwarding section. Up to 4 SSIDs may be used. You will need to supply the IP addres, Subnet mask and Defualt gateway use Select the interface for which you want to view packet statistics and the information will appear below.

Your router has a web interface, so you will login to it using your web browser.