Mobile Phones


Bar code printing is possible by using a bar code command. Plug the AC Adapter power cord into the wall outlet. Change the setting to the scale 1,2,3,4 and 5. This is the appropriate scale for the recommended paper thickness. Press the FEED button once to advance paper one line. Tighten the screws on both sides of the cable connector. Printer Head Cleaning Paper dust on the heating elements may lower the printing quality.

Uploader: Akicage
Date Added: 26 April 2008
File Size: 46.74 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73955
Price: Free* [*Free Regsitration Required]

Plug the interface connector into the serial port on the printer. If any items are damaged or missing, please contact your dealer for assistance. Low noise thermal printing. It has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as printing density.

Make sure paper roll has been installed properly. Make sure that you use the attached Power supply or equivalent. Be careful of sharp edge of the printer cover. Please call us in advance to ellox a pickup. Press 01 FEED button once to advance paper one line.

ELLIX-10 User Manual

Be sure to use paper rolls that meet the specifications. This equipment generates uses, and can radiate radio frequency energy ellidif not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.


The error LED will blink and Buzzer beep regularly. Close the Cover Wire.

Ellix 10 Printer – Control Plus GL

elllix Otherwise you may damage the power supply or the printer. Refer to Table A. Tear off the paper. It’s a community-based project which helps to repair anything.

However, this does not affect the printer performance. Connecting the Power Supply Elix the optional Power supply for your printer. Be sure to note the correct direction that the paper comes off the roll.

Therefore, be sure to use only the specified paper. Therefore, printing speed may slow down, the print pitch may not be correct, and some dots in some character may not be printed. The socket-outlet shall be near the equipment and it shall be easily accessible.

We shall continue to accept orders during the holiday season although our warehouses will remain closed between 20th December to 7th January for dispatch. Remove the used paper roll core if there is one.

The first column contains the hexadecimal codes and the second column gives the ASCII characters that correspond to the codes. Otherwise, you may damage the power supply or the printer. Direct pickups are not available from our warehouses or offices. Different print densities can be selected ellis DIP switches. If the printer does not function properly, contact your dealer.


If it is connected incorrectly, the internal circuit fuse of the printer may be blown or the external power supply may be damaged. Bar code printing is possible by using a bar code command. When connecting or disconnecting eklix power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. If you find that there is too much paper remaining on the roll paper when the Near-End sensor is triggered. For more information, please contact our customer service.

It does, however, offer some settings for users with special requirements. Reviews There are no reviews yet.